Product Description
A SERIES Transmitter + Receiver
Product parameter
- Protection level ：IP66
- Frequency :433(MHZ)
- Temperature:-35~+80℃
- Control distance ：100M
- Transmitter Power :2* AAA Batteries
- Transmitter Weight:200g
- Transmitter Dimensions:11.5×7.5×5.5cm
2/4/6 Channel Remote Control
- Antenna built-in,360 degree barrier-free remote control;
- Strong penetration, no need to aim;
A series Industrial Wireless Remote Control
Transmitter + Receiver
- Direct assistance;
- Super stable signal;
- Quality circuit board;
- 20 millions buttons ;
- IP66 class dust-proof and waterproof.
- 0.01S Quick response,
Noted:
The remote control needs to be used with the contactor. It cannot be directly connected to a power source. Connecting the power directly will burn the motherboard.
A Series Remote Control : Safer, More Efficient, Durable and Convenient
|
|
|
|
|---|---|---|
High quality circuit board
|
Unbreakable case
|
Can be used in multiple industrial fields |
|
|
|
|
|---|---|---|
SoftwareSimple button functions can be changed through the system (a dedicated USB cable needs to be purchased separately) |
Silicone push buttonMore durable silicone buttons for you to press more 2 million times. |
PackingThe product is packed in carton with foam cushioning material to prevent collision during transportation. |
|
|
|
|
|---|---|---|---|
|
2 channel remote control |
4 channel remote control |
6 channel remote control |
|
| Function | 1 Start Key；1 Stop；2 Available Command Keys | 1 Start Key；1 Stop；4 Available Command Keys | 1 Start Key；1 Stop；6 Available Command Keys |
| Power supply voltage | DC10-30v | DC10-30v,AC/DC36-460V | DC10-30v,AC/DC36-460V |
|
|
|
|
|
|
|---|---|---|---|---|---|
|
2 channel remote control |
4 channel remote control |
6 channel remote control |
8 channel remote control |
6 channel remote control |
|
| Function | 1 Start Key；1 EMS；2 Available Command Keys | 1 Start Key；1 EMS；4 Available Command Keys | 1 Start Key；1 EMS；6 Available Command Keys | 1 Start Key；1 EMS；8 Available Command Keys | 1 Start Key；1 Stop；6 Available Command Keys |
| Power supply voltage | AC/DC12-24V | AC/DC12-24V,AC110V,AC220V | AC/DC12-24V,AC110-460V | AC/DC12-24V.AC110-460V | AC DC 12-24V |
Sparky –
I am using this on a chain hoist.My hoist is a 4 function, up and down, left and right. Hooking it up was pretty simple, even for me.This is so much better than the wired control which always seemed to be in the way. This control feels well-made considering price. Overall, I am pleased, and I would buy again. 5 STARS
Juan martinez –
I was able to wire it up on my tow truck wheel lift that required six functions it works very well
Amazon Customer –
Works as it should but I need to reprogram it to use as more of an on off switch. Do you know what USB cable and what software i need to reprogram it?
Robert R Dean –
The media could not be loaded. I installed a spa as an addition to my pre-existing deck. A support girder made accessing the spa’s service panel inaccessible. So, I designed and built a system where a section of deck mechanically drops away, the empty spa elevevates its self 2” off it’s pad, and then it rides back on rails far enough to allow servicing.The system works great but I needed a way to control it. My options were few. I found this item and it does the job perfectly.The instructions are virtually non-existent but the schematic is printed right on the unit itself. Also, the individual wires are not labeled. The power leads are marked but in order to identify the others you’ll need to sit down with a meter.The range and the flexibility of this unit is truly impressive. It offered features I didn’t expect. In addition to the expected control features it also offers a “system hot” output which I used to power a couple of warning flashers. Plus, in addition to the six function buttons, the “Start” button can output as a 7th.It’s a quality product that solved my problem quite elegantly.